AtlasCopco Drill Rig
OC® L825 & ROC® L830
Master of productivity and flexibility
Recommend Hole Diameter 110-203mm
High drilling capacity and superior hole quality
AtlasCopco"s range of surface crawlers continues to raise
the bar.the popular multipurpose ROC L8 drill rig has been refined to
increase its performance and versatility-with an even higher capacity
and greater flexibility than previous models.
You can now drill production holes,improve stripping ratio with
double benching and pre-splitting ,and control your dilution with
reverse circulation(RC)with a single drill rig.the ROCL8 is ideal for
most applications in surface mining and quarrying,such as the drilling
of production blast holes,pre-split and buffer blast holes as well as
lifters. Its flexibility also makes it well suited for drilling
de-watering holes for pit-wall depressurisation.
Its low weight and limited dimensions makes the ROCL8 easy to move
from site to site,from bench to bench. The versatility of the ROCL8
gives you unique benefits.
The ROC L8 offers you the following benefits:
n Straight,accurate blast holes for controlled fragmentation
n Improved stripping ratio through double benching and pre-splitting
n Reduction of waste extraction by increasing the spit slope angle
n Controlled dilution with reverse circulation(RC)sampling(Optional module)
n Flexibility beyond conventional mining and quarry rigs
Long life aluminium box profile hydraulic cylinder feed system with exchangeable snap on stainless steel wear protections
A selection of rotary heads for optimum use of 4-6" down-the-hole hammers
Carousel tube handling system with deep hole capacity and free selection of drill tubes.
Full-view ROPS and FOPS cabin,silenced and vibration damped
The flexibility of the ROC L8 feed swing permits inclinations of up to 30 degree forward
Full-length,spring operated canopy doors offers full access to service points.
A smart investment in power and precision
The new ROCL8 operates at up to 30bar pressure and comes with a
choice of two different drill tube lengths;with long feed for 6 meter
drill tubes or with short feed for 5 meter drill tubes and toe hole
drilling capacity.The penetration rate of the new ROC L8 is faster than
its predecessors".Drilling capacity has been increased by higher
operating pressure and a unique cylinder feeding system. The new
aluminium profile and tube-handling system accommodates drill tubes of
up to 140mm(5 1/2") in diameter.
DTH hammers-strikingly efficient
The ROC L8 can be equipped with a range of AtlasCopco down-the
hole(DTH)hammers well known for their high performance in terms of
speed,reliability and longevity. With higher penetration rates and lower
fuel consumption per metre drilled,our DTH hammers make a positive
impact on your bottom line.
Flexibility and mobility in focus
The ROC L8 has excellent tramming ability for quick,safe
transportation between work site. For a rig its size,the ROC L8 has
outstanding terrain manoeuvrability with its ideal weight distribution
and low centre of gravity,generous clearance and heavy-duty tracks with
20 degrees of oscillation.
Designed to keep you up and running
Like all our crawlers,the ROCL8 is designed for easy maintenance
with ready access to service points. All hoses and cables are marked at
each end to coincide with the schematic drawing in spare parts lists for
better trouble-shooting. The Optional fast fuel-filling system adds
additional efficiency.
Steeper slopes mean better economy
Pre-split DTH drilling using the ROC L8 creates higher and narrower
benches. This contributes to steeper pit slopes and less waste rock to
be extracted. The advantage is a low waste-to-ore ratio,which means
higher productivity and better overall pit economy. The method had been
successfully used at a number of mines throughout the world.
Technical specification
|
Recommended hole range ROC L825
|
|||
|
COP 44, COP 54GE, COP 64 Gold
|
110-178 mm
|
4 5/16""-7""
|
|
|
Recommended hole range ROC L830
|
|||
|
COP 44, COP 54GE, COP 64 Gold
|
110-203 mm
|
4 5/16""-8""
|
|
|
|
|
|
|
|
Hole depth
|
25-54 m
|
82-178"
|
|
|
Atlas Copco XRX 10, two stage screw type compressor
|
|||
|
ROC L825
|
|||
|
Working pressure, max.
|
25 bar
|
363 psi
|
|
|
FAD
|
405 l/s
|
858 cfm
|
|
|
ROC L830
|
|||
|
Working pressure, max.
|
30 bar
|
435 psi
|
|
|
FAD
|
470 l/s
|
995 cfm
|
|
|
Engine
|
|||
|
ROC L825
|
|||
|
Caterpillar turbo charged, diesel engine, CAT C13, Tier lll/Stage 3
|
|||
|
Rating at 1,800 rpm
|
328 kW
|
440 hp
|
|
|
ROC L830
|
|||
|
Caterpillar turbo charged, diesel engine, CAT C15, Tier lll/Stage 3
|
|||
|
Rating at 1,800 rpm
|
402 kW
|
539 hp
|
|
|
Fuel tank
|
|||
|
Capacity
|
760
/1050 l |
201 US gal.
/277 US gal |
|
|
Feed
|
|||
|
Long feed (LF)
|
|||
|
Feed length, total
|
11,560 mm
|
38"
|
|
|
Travel length
|
7,540 mm
|
25"
|
|
|
Feed extention
|
1,150 mm
|
3"9""
|
|
|
Short feed (SF)
|
|||
|
Feed length, total
|
9,266 mm
|
30"4""
|
|
|
Travel length
|
5,400 mm
|
17"7""
|
|
|
Feed extention
|
1,900 mm
|
6"3""
|
|
|
Feed rate max.
|
0.9 m/s
|
177 ft/min
|
|
|
Feed force, max.
|
40 kN
|
8,992 lbf
|
|
|
Tramming
|
|||
|
Tramming speed, max.
|
3.5 km/h
|
2.2 mph
|
|
|
Traction force
|
166 kN
|
37,310 lbf
|
|
|
Track oscillation
|
+10º
|
|
|
|
Ground clearance
|
405 mm
|
16""
|
|
|
Transport dimensions
|
|||
|
Weight, excl. options (LF)
|
22,600 kg
|
49,800 lb
|
|
|
Weight, excl. options (SF)
|
22,200 kg
|
49,950 lb
|
|
|
Width
|
2,500 mm
|
8" 2 1/2""
|
|
|
Length (LF)
|
11,700 mm
|
38"5""
|
|
|
Length (SF)
|
10,700 mm
|
35"1""
|
|
|
Height (LF)
|
3,500 mm
|
11"6""
|
|
|
Height (SF)
|
3,350 mm
|
11"
|
|
A selection of options on ROC L825 & ROC® L830
For a more comprehensive option list,please contact your local AtlasCopco customer center.
Lifting aid
The feed-mounted service winch offers lifting capacity when loading
drill tubes into the rod handling system for extended hole depth or for
lifting components for service.the control is conveniently located at
the break out table
Smooth bench floors
Mounted on the rotary head,a laser receiver signals the hole depth
to the cab-mounted monitoring system and automatically stops the drill
at a pre-set hole depth. The function ensures smooth bench bottoms
irrespective of terrain and drill set up.
Accurate sampling
ROC L8 is designed to handle in-pi grade control for accurate
geological sampling. A selection of Reverse circulation options is
available for samples of varying size and quality. The pictured cone
sampler is controlled from the cabin.
Increased safety
With a reverse camera,the rear terrain can be viewed on a
cab-mounted monitor for increased safety while reverse tramming. The
same monitor may also be connected to the optional DVD for viewing DVD
discs.
Noise and vibration levels
|
ROC L8(25) / ROC L8(30)
|
|
|
A-weighted sound power level in decibel (ref. 1pW)
Single value declaration |
127
|
|
A-weighted sound pressure level at work station in decibel (ref. 20 mPa)
Double value declaration |
80
|
|
Accurancy, KpA, in decibel
|
3
|
|
A-weighted sound pressure level at 1m distance in decibel (ref. 20 mPa)
Double value declaration |
NA
|
|
Accurancy, KpA, in decibel
|
NA
|
|
Weighted whole body vibration level (m/s2) (Double value declaration)
|
0.3
|
|
Inaccuracy (m/s2)
|
0.2
|
Coverage area
The Hole World - ROC L-series
